Error Code 3f0 hard disk?
I bought a used laptop and wanted to load Windows on it, but every time a bluescreen pops up with the error code as shown in the picture. I also did a hard drive check and everything is okay, but the blue screen still comes up.
HP g7 250
Intel i3-1005G1 1.20 GHz
RAM: 8GB
Many thanks in advance
It says that he didn't find anything to boot.
So you have to insert an installation medium and boot from it.
(Change boot order in BIOS)
The USB stick is not recognized
What format is the stick?
How did you create it?
I have one with uefi one without uefi, the format is fat32 and both work 100% I tested it on other devices.
But the laptop has uefi
Your laptop couldn't find anything to boot. You have to write a stick or a DVD bootable.
a guide
Try another USB input?
The stick is not recognized in the BIOS? (So if you want to change the boot order)
Otherwise I would simply "re-create" the stick using the Media Creation Tool.
The stick is not recognized, I've already done that
Then it's best to take a DVD.
FAT32? What kind of system do you want to install.
To boot from the stick, you usually have to set it to Legacy USB and then hope that it appears in the boot menu, if necessary move the USB to the first place in the BIOS. Windows 10 will not be because it only does NTFS, or the installation has files larger than 2GB.
Also, if there's something like Fastboot or Secureboot, turn it off.
It is not necessary to recreate ne.
What exactly should I change in the list
Well set the USB stick first in the order.
I'm not sure what exactly it was made with, the sticks are from my brother, but I'm 100% sure they will work
Is not displayed, I still have an external hard drive with Kali Linux that works on the PC and the old laptop but not on the and it is also not displayed
To do this, you have to enter the BIOS with any F key, usually F10 at HP. If a bit tricky, the DEL or F1 or F2 key can also be used. Right at the start. Unfortunately, it depends on the model and BIOS.
Please give me a picture of the BIOS.
So from the boot menu
I know that USB Boot is activated and Secure Boot is deactivated in the Boot Options.
Below is:
UEFI Boot Order:
USB CD / DVD ROM drive
USB FLASH DRIVE / USB HARD DISK
OS BOOT MANAGER
INTERNAL CD / DVD ROM DRIVE
! Network adapter
Please put the USB flash drive first.
Nothing brought
MHH sees OK Out.
Which operating system do you want to install?
As I said, I would format the stick again and create it again using the Media Creation Tool.
https://www.exone.de/ratgeber/bootfaehigen-usb-stick-erstellen/
Windows 10
What I find strange, however, is that when I start the laptop with the USB stick and I press F12 that should be the boot options then the HP logo appears briefly as if it actually wanted to boot now, but then the bluescreen appears again, that's me now just noticed
And as I said, it is not necessary to rebuild the sticks. I used them yesterday for another computer
Bootstick is not recognized, there's still no answer. There's an error.
Did you create the USB stick using Rufus or MCT? Has the USB stick been set as the boot drive?
The laptop is simply "empty" and has no operating system on it. Have you ever checked whether there's a recovery partition on it? Did you buy a Windows from the seller?
This may apply to you:
"The issue may occur due to misconfiguration of the Intel Optane memory."
I'll try, thanks
