I have set up a web server in my logo 8 (6ED1052-2MD08-0BA0) without a display. It is only about a connection in the home network, everything else is done by the Vpn… So I can access the web interface via the 192.168.0.3 via the laptop with which I program the logo. In the Fritz Box, however, it is listed with a standard IP (192.168.178.xx). I can't access it from this address, only via 0.3. However, this does not work via the logo app on the cell phone, nor via the web interface on the cell phone, tablet or other computers, but only via the PC for programming. First question: Why is the IP in the logo 0.3 when it is displayed in the box as 178.29? Respectively. Why is it not reachable on 178.29 in the home network? And yes, the writing of port: 8080 does not change anything. Does it have anything to do with the standard gateway? In the logo this is 192.168.0.0 and I heard for the box is it 192.168.20.2? If I want to connect to the logo's via a direct connection, a new IP is also added, does it have anything to do with it? Thanks for all helpful answers!
PS: I have already tried other IP addresses without success… I just want to access the logo in the home network either via the Siemens app or via the web interface on my cell phone
The subnet mask
255.255.255.0
allows only one network.
e.g. 192.168.178.xyz
If you have devices in your
Want to operate home network,
you have to fit in this IP range.
This is usually done by an automatism.
An IP address must not be the same twice.
if you want to use a device with different network settings,
Example 192.168.0.3
then the subnet mask
be chosen differently
in that case
255.255.0.0
But please note that then all
192.168.uvw.xyz devices can participate.
Note with a LAN connection
the device IP can be different and does not matter, even if it does not match the network manually as specified.
Great thanks for the answer, I will try it again tomorrow!
