How do I properly set the partition on the hard disk? Ky KyleeWinter
Neither secure boot nor legacy option in the bios? Ha Handsomealan
Rename boot stick partition? Br Brentley
Hi
To flash the BIOS, I need the option UEFI boot to enable in the boot menu.
But the option is not listed.
My device: Laptop Packard Bell pew91 from the TK85 series
Did I miss something?
The part is quite old, right? There used to be no UEFI.
But still you can update the bios. On the manufacturer's side at Bios update are many updates, I have to install what before a tool to flash?
Mh you probably need one without UEFI. There are many update systems. Either via a bootable medium, just stop without UEFI, sometimes synonymous out of a running system, LG and ASUS have offered that partially.
Do you have a link to the page with the bios updates?
Otherwise I have to do about the exe
To flash you have here (http://www.packardbell.com/pb/de/DE/content/download) under Windows download a zip file, unzip and run in the unzipped directory… \ Windows \ PEW7130.exe. So UEFI is not required and probably not yet supported by the old BIOS, current version of 11/2012.
If there's one, sure.
http://www.packardbell.com/pb/de/DE/content/download
The data is above.
Unfortunately, you have to enter it yourself
That's what Culles did, it looks like, so you should follow his advice.
As @Cullus already wrote is in the zip dat. This exe.
But I'll let it be the safest when it's about DOS flashing it.
Well… Already. But you need just a flash option that works without UEFI. Was normal before.
Thank you.
The BIOS is the predecessor of the UEFI. The latter has since around 2012 replaced the BIOS in computer construction.
There's no UEFI boot function in a BIOS. - This only exists with a UEFI.
In contrast, the UEFI can be activated by a setting change the BIOS function.
I estimate that before 2012, your laptop was equipped with a classic BIOS, built and thus has no UEFI boot option.
